Welcome to TalkGraphics.com
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 46
  1. #1
    Join Date
    Aug 2007
    Posts
    13

    Default Drawing Rosette Patterns

    I am very new to Xtreme (since yesterday) and am trying to learn it. I am trying to do line drawings of rosettes for chip carving patterns. I manually drew a circulral template of degree lines to use as a template when drawing these rosettes. I imported this into Xtreme as a bmp. My big problem with this is I have not found a way to lock this template down and it moves and gets out of proper position constantly. Can this be done?
    I searched the web for months to find a program that I could use to draw this type patterns and thought I had found one but I am really having trouble learning to use it this morning. Any help will be greatly appreciated.

  2. #2
    Join Date
    Aug 2000
    Location
    Beaverton, OR
    Posts
    3,267

    Default Re: Drawing Rosette Patterns

    http://www.xaraxone.com/html/shareware.html

    Scroll down and look at the Curve Generation utility. Would this help?

  3. #3
    Join Date
    Aug 2000
    Location
    Republic of San Marino
    Posts
    266

    Default Re: Drawing Rosette Patterns

    Faeb,

    To avoid moving the bitmap pattern, put it in a layer behind you vector drawing.
    You can set a layer to be visible but "fixed" so you cannot grab objects.

    Luciano

  4. #4

    Default Re: Drawing Rosette Patterns

    There are many tutorials and workbooks that you can read through at Gary's web site, The Xaraxone.
    I would look through the workbooks.
    http://www.xaraxone.com/html/workbook_index.html#L

    Sounds like you need to put your template on a layer and lock it so that it does not move around, Then you can draw your designs on a new layer on top of it.

    http://www.xaraxone.com/webxealot/workbook22/page_3.htm
    Bruce
    ----------------------------------------------------------
    Happiness is free for the taking, Please take some for yourself
    Artist For Hire

  5. #5
    Join Date
    Jan 2006
    Location
    Urmston, Manchester,England
    Posts
    2,527

    Default Re: Drawing Rosette Patterns

    Quote Originally Posted by faeb View Post
    I am very new to Xtreme (since yesterday) and am trying to learn it. I am trying to do line drawings of rosettes for chip carving patterns. I manually drew a circulral template of degree lines to use as a template when drawing these rosettes. I imported this into Xtreme as a bmp. My big problem with this is I have not found a way to lock this template down and it moves and gets out of proper position constantly. Can this be done?
    I searched the web for months to find a program that I could use to draw this type patterns and thought I had found one but I am really having trouble learning to use it this morning. Any help will be greatly appreciated.
    Just to give you the method I use.

    Stygg2003
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Trace.jpg 
Views:	3062 
Size:	37.1 KB 
ID:	40875  

  6. #6
    Join Date
    Aug 2000
    Location
    Harwich, Essex, England
    Posts
    22,090

    Default Re: Drawing Rosette Patterns

    Stygg,

    Please don't "Quote message in reply" unless it is completely necessary please.
    Egg

    Minis Forum UM780XTX AMD Ryzen7 7840HS with AMD Radeon 780M Graphics + 32 GB Ram + MSI Optix Mag321 Curv monitor
    + 1Tb SSD + 232 GB SSD + 250 GB SSD portable drive + ISP = BT + Web Hosting = TSO Host

  7. #7
    Join Date
    Aug 2007
    Posts
    13

    Default Re: Drawing Rosette Patterns

    Thanks to all who helped me with the layering. It works wonderful.
    Also, I appreciate all the leads to places where I can find tutor etc.
    There is so many out there. If only I knew what to look for... I am good at
    having problems with no name. :-(
    I have another question that I have searched for and can not find out how it should be done and I am hoping someone will come to my rescue... :-) It is probably so very simple for most of you but I am at my wits end trying to find out how to do this....
    Problem.... How do I draw a square outline, put 4 little wedge shapes inside and seal them to make this all one object that I can copy/paste in several places on my project? I hope this is clearer than mud.
    Any and all help is appreciated.
    Faye

  8. #8
    Join Date
    Feb 2007
    Location
    UK
    Posts
    21,567

    Default Re: Drawing Rosette Patterns

    Hi Faye

    hopefully this will help
    Attached Files Attached Files
    -------------------------------
    Nothing lasts forever...

  9. #9
    Join Date
    Aug 2000
    Location
    Harwich, Essex, England
    Posts
    22,090

    Default Re: Drawing Rosette Patterns

    Hi Faye,

    Like all things Xtreme there are normally numerous ways of creating the same end result. So here's another alternative to Steve's method.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	!1.gif 
Views:	2916 
Size:	14.3 KB 
ID:	40910  
    Egg

    Minis Forum UM780XTX AMD Ryzen7 7840HS with AMD Radeon 780M Graphics + 32 GB Ram + MSI Optix Mag321 Curv monitor
    + 1Tb SSD + 232 GB SSD + 250 GB SSD portable drive + ISP = BT + Web Hosting = TSO Host

  10. #10
    Join Date
    Feb 2007
    Location
    UK
    Posts
    21,567

    Default Re: Drawing Rosette Patterns

    Good one too Egg - anyone would think you'd been doing this for longer than me
    -------------------------------
    Nothing lasts forever...

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •