Expanding page to fill screeen - Need help for newbie please

[Littlegiantrme]

Hi there. I need some guidance. I have set my screen widths for the main screen to 1920 x 1080. I have the pages made inside the yellow outline turned on, and I have the pages set to autofit width, but they do not fill up the page when looking on a website preview with higher resolution. I even tried to change the page width to the screen resolution (2048) and my created page was still smaller. The page I created does not seem to expand or shrink with different computer screens.

Any help would be greatly appreciated. My pages aren't bad for a first timer and I know this software can do much more than I am doing but this page size thing overall is kicking my butt. Thanks for any help you can offer

[wizard509]

I think many here can help Such as GWP, Acorn, Initiostarr to name a few, but alas not I'

[Chris M]

I don't understand the yellow outline, but, if you mean Scale To Fit Width when you say Autofit Width, then you need to have the 'Maximum' setting higher than 1920.
Utilities > Web Properties > Export (tab) > Scale To Fit Width (radio button) > Maximum (2048 or above)

Any chance of uploading the .web/.xar for a more informed look?

[Littlegiantrme]

I don't understand the yellow outline, but, if you mean Scale To Fit Width when you say Autofit Width, then you need to have the 'Maximum' setting higher than 1920.
Utilities > Web Properties > Export (tab) > Scale To Fit Width (radio button) > Maximum (2048 or above)

Any chance of uploading the .web/.xar for a more informed look?

Attached is the .web file and a screenshot of the yellow border I speak of. Any look or advice would be greatly appreciated. I will look at the Export tab and see what the setting is. I know it is scale to fit but I think the pix value is 1280, but will check.

While looking at the file if you have any other tips or suggestions please let me know. As I said I am a newbie and know I am not looking or doing everything correctly and need guidance. Thank you a lot!

[Littlegiantrme]

Attached is the .web file and a screenshot of the yellow border I speak of. Any look or advice would be greatly appreciated. I will look at the Export tab and see what the setting is. I know it is scale to fit but I think the pix value is 1280, but will check.

While looking at the file if you have any other tips or suggestions please let me know. As I said I am a newbie and know I am not looking or doing everything correctly and need guidance. Thank you a lot!

Also I was opening that things would scale to size depending on the screen size. I did find the Export Scale to fit but that only fills the screen with my background color, it does not make the text/pictures/objects larger or smaller to fit the screen appropriately. Thank you again

[Acorn]

Where to begin.

The Yellow edging is showing the Print Border. Window > Show Print Borders.
The Grey frame is because the printer page setting is considerably smaller than your page.

You have built a small site in a 2048 wide page.
You have set Scale to Fit width as 1280px.
This is why nothing is scaling.
That is why pages are slamming the left browser edge.

You have added a 1920px square background but added a Black 96px Border to a shape that is 3680x2712px with a Bitmap Fill but keeping it 90dpi and size 2048x1884px.
Remove the border.
Better, delete it altogether.

Drag the 'pexels' image onto the design.
Set it Dark Contone to Black and the Create Bitmap Copy.
Click on this and pick Set as Pasteboard Background.
You then need to remove these two images off the design, right-click on the Pasteboard and pick Pasteboard background > Fill browser window.

I would kill the rollover you have applied to the NavBar; it is awful.

Having the NavBar at the bottom of the page assumes viewers will be able to see the entire page in the browser. Most will be scrolling to get to the NavBar.
Move it to the top of the page.
Don't use a NavBar where a Button will do.

Delete the MouseOn layer; it serves no purpose.
On the Calendar page, you added a text line that should be on MouseOff.

None of your pages have any cohesion so focus on the good bits of the Home page any copy these through.
The calendar table is a mish-mash of differing (clashing) colours and fonts.

No download should be 56MB.
You tell the reader to click on the image but the yellow pointy arrow is downloading too.
I would get the trial of Xara Designer Pro X and drop the PDF onto it and create a set of Xara pages you can add to this site.

Delete the Variant until you have something to present.
If you don't, you will be Sharing across needlessly.

Acorn

[Littlegiantrme]

Also I was opening that things would scale to size depending on the screen size. I did find the Export Scale to fit but that only fills the screen with my background color, it does not make the text/pictures/objects larger or smaller to fit the screen appropriately. Thank you again

Thank you very much for your comments, suggestions and really helpful input. I do really appreciate it. I have a lot to learn, and this helps, greatly.


How do I set my editting view to the same size as a 1280 screen per se? I want to use the full screen of a 1280 pixel wide screen so people do not have to scroll right to see it, and want to fill up the screen. RIght now I can see my fixed screen but it is still relatively small. Is there a setting to show that screen size in my editor so I know what bounds to stay within?

Thank you again