Welcome to TalkGraphics.com
Results 1 to 9 of 9
  1. #1

    Default Chamfer Feature on Shape Corners?

    Is there a Chamfer feature for Shapes, (i.e. Flat Rectangle Corners)?

  2. #2
    Join Date
    Apr 2012
    Location
    SW England
    Posts
    17,747

    Default Re: Chamfer Feature on Shape Corners?

    Quote Originally Posted by tomcadman View Post
    Is there a Chamfer feature for Shapes, (i.e. Flat Rectangle Corners)?
    Tom, try Insert > Shapes > More Shapes: (Shape 1, Shape 2, Shape 7).
    Hint: they are all the exact same pattern; Xara thinks more is good.

    While you are looking, do tell me what Shape 8 could possibly be for?

    I would have said a chamfer would be made from the inclusion of the Contour tool.

    Acorn
    Acorn - installed Xara software: Cloud+/Pro+ and most others back through time (to CC's Artworks). Contact for technical remediation/consultancy for your web designs.
    When we provide assistance, your responses are valuable as they benefit the community. TG Nuggets you might like. Report faults: Xara Cloud+/Pro+/Magix Legacy; Xara KB & Chat

  3. #3
    Join Date
    Jul 2015
    Location
    Currently New York State
    Posts
    774

    Default Re: Chamfer Feature on Shape Corners?

    I am not aware of anything other than the rounded corners.

    Ray

  4. #4
    Join Date
    Apr 2012
    Location
    SW England
    Posts
    17,747

    Default Re: Chamfer Feature on Shape Corners?

    Quote Originally Posted by RKissane View Post
    I am not aware of anything other than the rounded corners.
    Ray
    Ray, all have a green control, which when you hover over tells you what it does and if you click several times it produces a flat corner.
    You need to drag the yellow control (Corner Size) to reveal the green control.
    At some scales the controls hide.

    Acorn
    Acorn - installed Xara software: Cloud+/Pro+ and most others back through time (to CC's Artworks). Contact for technical remediation/consultancy for your web designs.
    When we provide assistance, your responses are valuable as they benefit the community. TG Nuggets you might like. Report faults: Xara Cloud+/Pro+/Magix Legacy; Xara KB & Chat

  5. #5
    Join Date
    Aug 2000
    Location
    Placitas, New Mexico, USA
    Posts
    41,487

    Default Re: Chamfer Feature on Shape Corners?

    Look at the Smart Shape rectangles. #7 specifically. These offer more options for the corners.

  6. #6
    Join Date
    Apr 2012
    Location
    SW England
    Posts
    17,747

    Default Re: Chamfer Feature on Shape Corners?

    Quote Originally Posted by gwpriester View Post
    Look at the Smart Shape rectangles. #7 specifically. These offer more options for the corners.
    Sorry Gary, all three (1, 2, 7) let you have curved, flat, cornered & inward curved.

    They are all the same shape with different settings and sizing applied.

    Only Shape 7 is implemented correctly by the developer(s); Shapes 1 & 2 have been distorted at some point.
    To evidence this, Import all three Shapes and change all to rounded corners throughout.
    Next, use the blue Height and Width controls to get the smallest "circle".
    In the Select Tool examine W&H to see the distortion.
    Change all corners to cut rectangles. Only Shape 7 presents a regular cruciform; the others are off.

    Acorn
    Last edited by Acorn; 19 September 2019 at 08:59 PM.
    Acorn - installed Xara software: Cloud+/Pro+ and most others back through time (to CC's Artworks). Contact for technical remediation/consultancy for your web designs.
    When we provide assistance, your responses are valuable as they benefit the community. TG Nuggets you might like. Report faults: Xara Cloud+/Pro+/Magix Legacy; Xara KB & Chat

  7. #7
    Join Date
    Aug 2000
    Location
    Placitas, New Mexico, USA
    Posts
    41,487

    Default Re: Chamfer Feature on Shape Corners?

    Would this work?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	chamfering at the bit.png 
Views:	103 
Size:	12.0 KB 
ID:	125194  

  8. #8

    Default Re: Chamfer Feature on Shape Corners?

    Quote Originally Posted by Acorn View Post

    While you are looking, do tell me what Shape 8 could possibly be for?
    I figured out what shape 8 is for...
    Attached Images Attached Images  

  9. #9
    Join Date
    Apr 2012
    Location
    SW England
    Posts
    17,747

    Bug Re: Chamfer Feature on Shape Corners?

    Quote Originally Posted by tomcadman View Post
    I figured out what shape 8 is for...
    Tom, clever as you have made it, it's purpose still defeats me.
    I would have to add screws to fix the plate to stop it falling off its plinth. I can at least add a Bevel.

    Shape 8 issues:
    • The plate default (black) colour is labelled as Page Background. Why? It has nothing to do with a page. It is just lazy designing.
    • The plate corners do not have any controls to change them.
    • The plinth corners do not have any controls to change them.
    • The holes have a maximum size.
    • The Resize controls shrink down the holes to about 600 millipoints (mp), serving no purpose.
    • The absolute minimum resize leaves horizontal cusps of 20mp but vertical ones of 1690mp. Sloppy.
    • No Line Width setting works. Sticks as None.
    • No Shape Tool adjustments work.
    • Select the Shape Tool for the plinth and press the Tab key. The bottom left notch has a control arm that is different to all the others.
    • Stops being "smart" with an Extrusion or Text Inside.

    I therefore contend that using Shape 8 is counter-productive as making it fit one's design will fail.

    Acorn
    Acorn - installed Xara software: Cloud+/Pro+ and most others back through time (to CC's Artworks). Contact for technical remediation/consultancy for your web designs.
    When we provide assistance, your responses are valuable as they benefit the community. TG Nuggets you might like. Report faults: Xara Cloud+/Pro+/Magix Legacy; Xara KB & Chat

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •