Welcome to TalkGraphics.com
Results 1 to 7 of 7

Thread: Grid to front

  1. #1

    Default Grid to front

    Meow

    Is there any way to put grid to front of all layers?
    I have Xara Page & Layout Designer 11.


    Ponny

  2. #2
    Join Date
    Apr 2012
    Location
    SW England
    Posts
    7,312

    Default Re: Grid to front

    Add another Layer and draw a grid on it.
    Possibly use one of Xara's pre-designed grids.
    Create a 49.5px box with no fill and a line of width 0.25px. Make a bitmap copy. Use this in a repeating Filling for a large box or other shape.

    Acorn
    Acorn - My current Xara software: XDPX365, XDPX11 (32/64-bit), WD365 Premium, XPGD10, X3D7 and lots of licences back through time (to CC's Artworks)

  3. #3
    Join Date
    Aug 2000
    Location
    Placitas, New Mexico, USA
    Posts
    34,756

    Default Re: Grid to front

    Not that I am aware. I will move this thread to Dear Xara as this is now a feature request.
    Gary W. Priester
    Mr. Moderator Emeritus Dude
    , Sir

    gwpriester.com | Custom-Stereograms.com | eyeTricks on Facebook






  4. #4

    Default Re: Grid to front

    In some pictures is grid on the top of all objects. I can see the grid everywhere.
    But in some other pictures is grid on the bottom.
    What is the trick?
    And I can't find setting for this.


    Ponny

  5. #5
    Join Date
    Apr 2012
    Location
    SW England
    Posts
    7,312

    Default Re: Grid to front

    Finally understand what you are asking.

    Show Grid (#) always puts the grid on top.
    it gets obscured with colours at the red end of the spectrum.
    If you can't see the grid change your Zoom or reduce your View Quality.

    Acorn
    Acorn - My current Xara software: XDPX365, XDPX11 (32/64-bit), WD365 Premium, XPGD10, X3D7 and lots of licences back through time (to CC's Artworks)

  6. #6

    Default Re: Grid to front

    Just today.
    The same file.
    When I opened it, I can't se the grid at fill of large object. The grid was on bottom, I think. But then - after a lot of editing - I really don't know when - right now I can see the grid. Grid is now on top.
    But I not changed view quality in any way.
    Who knows, maybe I should to hide grid and show it again?

    And another test.
    1. I open SVG file in Xara Page & Layout Designer 11.
    - Grid is on the bottom.
    2. Then I save As to XAR file format.
    3. Close file and open again.
    - Now is grid on the top.

    Yes there is some mistery about grid.

  7. #7
    Join Date
    Apr 2012
    Location
    SW England
    Posts
    7,312

    Default Re: Grid to front

    I've just tried importing a few SVGs onto a Xara design page with the Grid showing and also not showing.
    The Grid remains on top.

    It might be your graphics card.

    Acorn
    Acorn - My current Xara software: XDPX365, XDPX11 (32/64-bit), WD365 Premium, XPGD10, X3D7 and lots of licences back through time (to CC's Artworks)

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •