Tutorial forWheels

[wheels]

Mark I really don't understand very well. You say your emoticons flash. Are they animated? I don't know what could be causing that, if you have other browsers installed, try opening in those and see if the problem persists. I use Irfanview as my primary image viewer, but it does not play some animated gifs properly so I only use it as a still image viewer, and maybe a couple other things. I saved your windows 7 test and opened it in Opera, IrfanView, Safari, Google Chrome, Firefox, and Internet Explorer and it works properly in all those with no apparent flashing.

When you reset Xara3D6, did you un-install it then delete the folder or what did you do? The resetting issue has me somewhat confused. Is your Xara 3D Maker 7 still functioning?

hello Larry, thank you very much for the quick reply, was not expecting anything for ages, I know you are a busy person.
Regarding the animations, yes this is what I cannot understand they are working fine everywhere else except where they are supposed to be sent to for approval to be put on another website.
The only way I can explain it is if I give you the link, you can put a shortcut in their which I have called it and see what happens.
I have done many of these in the last 2 1/2 years since one of the people on here helped out making them heart spinning and leaving the text standing alone. Would you will want to have not mastered that, was only taking part of it and using it in putting my own text.
Back to the other problem regarding 3-D maker 7 that is what I used to make this one we are seeing because I cannot get my version six 3-D back because of the error shown.
Just in case I thought there was some problem with the adjustments which we made with lights and text I wanted to reset everything to see and sent another test to be approved, with the same result, so I I thought I would uninstall it and reinstall to see what happened, but unfortunately you can see the error that I supplied and will not go in.
I was using version 6 to make all those spinning heart and emotions and version 7 for all the picture ones.
As I made a previous test when I was in Windows 7 and uploaded that has both versions are working on Windows 7 and installed I did that to check up again with the same result.
It are just too hard to explain without seeing it.
The animations are made and sent up to be approved on the website for display, the one I supplied to you was just a test and also with appropriate language.
The website they are used for is an adult site where I talked to some certain people on and make banners and emoticons or some girls that I talked to.
So the only thing I can do is paste the link to the place where you can display the emoticon shortcut so I can show you.

There is little box at the top of this page on the right-hand side where you can put to shortcut and I will give you.

[removed link to site that is a NSFW website. We don't allow links to adult content websites]

You will see on the top right-hand side there is a search little box, when people submit their animations to be approved so that they are not pornographic in the fact that they cannot betray any children if you understand.
Here is a short cut to put in the Windows search box. ( :mlwin7tstsh ) if you put that into the text search including the: you will see what happens.
I know it is long-winded explanation but it's the only way I can show you what happens.

As I said I have made thousands of these with different text and never had a problem, we have our own profile page as well and I have used a direct link and HTML and they are both showing up okay on my homepage message window where people can leave messages because I do that for some testing.

So I cannot understand what's happening, obviously it is something to do with their website because it is something recently when they did some updates I suppose, and yet when people make normal banners with a square box and pictures and text filling it they seem to work fine.
Hope you understand the above, thank you for your quick response, was very good of you.

Also regarding version 6I just remembered a question you asked, I reset the software, I restarted the software, no change to the version 6 interface so I ain't deleted it actually uninstalled it, not from the Control Panel in Windows XP from the software list were its gives you give you all of the the xara programs in the all programs list
I did have a look in the and remove list and version 6 has gone from their, also I look for any folders and the only folders are for other programs no version 6.
Regards Mark

[wheels]

hello Larry, thank you very much for the quick reply, was not expecting anything for ages, I know you are a busy person.
Regarding the animations, yes this is what I cannot understand they are working fine everywhere else except where they are supposed to be sent to for approval to be put on another website.
The only way I can explain it is if I give you the link, you can put a shortcut in their which I have called it and see what happens.
I have done many of these in the last 2 1/2 years since one of the people on here helped out making them heart spinning and leaving the text standing alone. Would you will want to have not mastered that, was only taking part of it and using it in putting my own text.
Back to the other problem regarding 3-D maker 7 that is what I used to make this one we are seeing because I cannot get my version six 3-D back because of the error shown.
Just in case I thought there was some problem with the adjustments which we made with lights and text I wanted to reset everything to see and sent another test to be approved, with the same result, so I I thought I would uninstall it and reinstall to see what happened, but unfortunately you can see the error that I supplied and will not go in.
I was using version 6 to make all those spinning heart and emotions and version 7 for all the picture ones.
As I made a previous test when I was in Windows 7 and uploaded that has both versions are working on Windows 7 and installed I did that to check up again with the same result.
It are just too hard to explain without seeing it.
The animations are made and sent up to be approved on the website for display, the one I supplied to you was just a test and also with appropriate language.
The website they are used for is an adult site where I talked to some certain people on and make banners and emoticons or some girls that I talked to.
So the only thing I can do is paste the link to the place where you can display the emoticon shortcut so I can show you.

There is little box at the top of this page on the right-hand side where you can put to shortcut and I will give you.

[removed link to site that is a NSFW website. We don't allow links to adult content websites]

You will see on the top right-hand side there is a search little box, when people submit their animations to be approved so that they are not pornographic in the fact that they cannot betray any children if you understand.
Here is a short cut to put in the Windows search box. ( :mlwin7tstsh ) if you put that into the text search including the: you will see what happens.
I know it is long-winded explanation but it's the only way I can show you what happens.

As I said I have made thousands of these with different text and never had a problem, we have our own profile page as well and I have used a direct link and HTML and they are both showing up okay on my homepage message window where people can leave messages because I do that for some testing.

So I cannot understand what's happening, obviously it is something to do with their website because it is something recently when they did some updates I suppose, and yet when people make normal banners with a square box and pictures and text filling it they seem to work fine.
Hope you understand the above, thank you for your quick response, was very good of you.

Also regarding version 6I just remembered a question you asked, I reset the software, I restarted the software, no change to the version 6 interface so I ain't deleted it actually uninstalled it, not from the Control Panel in Windows XP from the software list were its gives you give you all of the the xara programs in the all programs list
I did have a look in the and remove list and version 6 has gone from their, also I look for any folders and the only folders are for other programs no version 6.
Regards Mark

also I can give you a test to show you which one works to put in that search site, has a nice friend of mine are made something for, here is the shortcut ( :mldbsh )
this will show you what they are supposed to be like, sorry for the second reply I was thinking about it after I posted the previous message. Regards Mark

[wizard509]

Mark I cannot load the page. All I get is a blank screen, no search box, nothing. Sorry

[wheels]

Mark I cannot load the page. All I get is a blank screen, no search box, nothing. Sorry

hello Larry, I just try to link myself and it worked, not sure what happened, regards Mark

[wizard509]

Mark, I still cannot access it. I have tried several times with opera and also with Internet Explorer always the same result of nothing. Maybe I am just missing something.

[wheels]

Mark, I still cannot access it. I have tried several times with opera and also with Internet Explorer always the same result of nothing. Maybe I am just missing something.

I cannot understand it, I just clicked on the link again it took me straight to the page.

I have no idea why you cannot access it. Thousands of people use it each day to check their images and to submit them.

http://www.myfreecams.com/mfc2/php/u...31820746511221

I will try this one

[Barbara B]

Wheels, the website you linked to in your post is not acceptable here on TG. We do not allow linking of any kind to any portion of an Adult site or links to pages or sites that would generally be considered Not Safe For Work (NSFW), ie sites that if visited on a work computer could violate HR rules and get you fired or disciplined.

Posting links like this again puts your TG membership and posting privileges in jeopardy.

If you need help because your graphics are suddenly displaying differently on a third party website than they did before you need to contact that site and ask for assistance. Xara produces industry standard graphics that work on websites of all kinds.

I am closing this thread because it has now gone off topic.

If you feel the problem does lie in how you are constructing these graphics open up another thread, but be sure that any links or content you use as examples is family friendly.

Additionally this thread was misplaced from the beginging it really belonged in the Xara3d forum and I am moving it there and leaving behind a permanent redirect notice from this forum to the new location.