3d photo

[ec77]

im still trying but i can only get the board with text on it to spin half way and the text isnt to clear but im doing has text and not button is that right ? emma

[simsmj]

It's close enough, just reduce the line size to make the board and the text overlap more, and then select the text alone, and give it a thicker extrusion, so that it sits proud of the face of the board. With the Swing animation, you can change the extent of the swing by changing the angle. If you set 90 degrees, Swing moves from 0 to 90 in one direction, then all the way back to 0 and then to 90 in the other direction and back to 0 again. So the object will actually swing twice that angle in total.

Mike

[ec77]

got that bit done emma

[simsmj]

That's fine, you've adjusted the extrusion of the text. Did you change the animation to Rotate?.
If you adjust the line size to zero, both the text and the oval should be centred on each other.

Mike

[ec77]

hi the animation is moving in swing 1 and sorry what u mean size to zero ? emma

[simsmj]

In the Swing 1 dialogue, is the Angle section ticked? In mine, if that isn't ticked, the swing only works in one direction, it doesn't swing back, and it swings a full 180 degrees.
I didn't know it would do that. Anyway, to centre the text and oval, the spacing between lines has to be reduced to 0. That setting is on the top menu bar, second from the right. It is normally at 80 by default. As I said, Xara3d is a text-based application, and originally you could only type text into it. The only major change from the early versions was the ability to import non-text shapes created in other applications, as long as they were vector-based in .wmf or .xar format.

Xara3d still lays out all its objects as if they were characters on a page, and so there are options to change the spacing between characters on the same line, (Tracking), and between characters on adjacent lines, (Line Size). You can also shrink or expand characters relative to each other, and select different fonts for them. You can separate two adjacent characters by typing a space between them. You can also have multiple pages, and have Xara3d step between them in sequence. This is what the Step animation really is, and unlike the other animations, you can select an animation like Rotate for the file, and still automaticlly Step between pages.

So you can create several different animations, (all Rotate1, say), each on their own page in the same file, and Xara3d will run the animation through one cycle on page 1, then Step to page 2 and run the animation on that for one cycle, and so on.

[ec77]

hi i really cant work out how to get the square to move in front like the Amore Elite image. emma