2 Attachment(s)
Cannot use my second activation
BACKGROUND: -
I fired up the laptop I haven't used for quite a while to put on the ver 15 trial so I could verify the squish workflow issue [trial having died on my main computer]
did this ok
ISSUE: -
when I tried to use ver 12 on the laptop it said that I needed to deactivate one usage to use it on the laptop - magix screen came up showing two activations which were both for the same computer! [the main one] - unfortunately I didn't grab this I just deactivated one of them - program open ok and I used it, it also installed an update that was pending
next time I try to open ver 12 I get this:
Attachment 119755
when I went into my account stills showed both activated for the same main computer - both for todays date !?:
Attachment 119756
I could now not access the ver 12 program on the laptop to deactivate it internally - and I had just used my once a month 30 days account deactivation for ver12, or so I thought, but on going to the account I was able to deactivate - but still I got the message number one above on the laptop - I rebooted the laptop, still message number one.. I went back to my account where it said I had deactivated, refreshed the page and then it said two activations on the same computer again as before - maybe the page refresh a mistake... so deactivated again logged off service centre and back on - yes now only the main computer activation showing.. progress? unfortunately no..
because... when trying to activate on the laptop still get message number one
so I have a spare activation but I cannot use it on the laptop - was accepting the update a mistake? if so it should not have been offered.. I think maybe this is the case because the laptop shows ver 12.8.1, wheras the main shows ver 12.6.2 presumably the point at which my ver 12 licence expired - if so then I repeat the update to ver 12 on the laptop should not have been offered
My friends, this has gone beyond hyperbole - this has now entered the realm of hard stares, not visible over the internet, but believe me they are there - not only are you breaking workflow in ver12, but your activation/update system appears in part at least broken - it should be way more robust than this
when I have time I may try restoring windows clean on the laptop - or if practical using a third computer
Meanwhile I can at least install and use use ver 11 on the laptop [I hope] - and I can try uninstalling ver 12 and reinstalling an earlier version and ignoring any update notifications - but they may persist and I really should not have to do this... and of course, it may not work...
all this is time wasted and no incentive to stick with Xara/magix whatsoever...
EDIT sorry about the mix up on description of grab two - I really wish I'd grabbed that first screen - but it does not obviate the issue about the update - :o
2 Attachment(s)
Re: Cannot use my second activation
UPDATE
I uninstalled the ver 12 on the laptop and reinstalled version 12.4 now I get this:
Attachment 119758
in the account at least there is only the main computer activated:
Attachment 119760
but I still cannot use it on the laptop now.. without contacting support - but I have never installed the program on any computers other than these two - this is crap
just as well I don't currently need it on the laptop... guess I can contact support if I do, Xara was always good... magix,well.... we shall see
Re: Cannot use my second activation
THOSE CONFUSED BY THE PREVIOUS POSTS [and that might include me looking at it again] MAY START HERE:
its an activation/update issue and this is what happened:
I fired up my laptop after a fair while of non-use ... somehow the system seems then to allow an update from ver 12.2 to ver 12.8 that goes beyond my licence period - so from then on it will not start and that I can understand... but why is it doing this?
I've verified this by restoring the laptop OS from backup image - all is well with xdpx ver12.2 until the offer of update comes along and is installed [just the one update] jumping it up to the version 12.8 that I am not entitled to, when understanderbly as said, it won't revalidate the licence activation
not right is it.. any chance you could, er... fix it ?
no rush I know you are busy, and I rarely use the laptop at the moment and when I do ver11 will probably suffice should I need xara... but it could be a problem for others...
Re: Cannot use my second activation
Quote:
Originally Posted by
handrawn
THOSE CONFUSED BY THE PREVIOUS POSTS [and that might include me looking at it again] MAY START HERE:
its an activation/update issue and this is what happened:
I fired up my laptop after a fair while of non-use ... somehow the system seems then to allow an update from ver 12.2 to ver 12.8 that goes beyond my licence period - so from then on it will not start and that I can understand... but why is it doing this?
I've verified this by restoring the laptop OS from backup image - all is well with xdpx ver12.2 until the offer of update comes along and is installed [just the one update] jumping it up to the version 12.8 that I am not entitled to, when understanderbly as said, it won't revalidate the licence activation
not right is it.. any chance you could, er... fix it ?
no rush I know you are busy, and I rarely use the laptop at the moment and when I do ver11 will probably suffice should I need xara... but it could be a problem for others...
I feel your pain. Xara seems to assume that bug fixes and updates can be lumped together and so the burden is on the Customer to download the correct version and ignore the offer of the "available" update. In the period you had paid for the service, you will have been allow to up-version and get free bug updates. Get out of service cover and you install the wrong version, you get caught in this quagmire.
I use Bullguard AV and this has restricted activations.
All is run from a logon to the site where I can see devices, activations and cover and I can disable, change and download appropriate versions at any time.
All rocket science,
Acorn
Re: Cannot use my second activation
I believe the correct four-letter description of this situation has already been used in this thread....
so .. if I download ver12.4 from Xara and install it [or just stick with ver 12.2] I need to just ignore the update notices? pleas tell me there is a way to turn these off otherwise it's a joke gone too too far...
Re: Cannot use my second activation
thanks acorn - it seems there are quite a few activation issues on the forum
a sensible outfit would make bug fixes separate patches - not much use to anyone who has got an activated program are they, but then that would mean different sets of bug fixes for different stages of the 365.... total pigs-ear isn't it [https://www.talkgraphics.com/showthr...99#post585099]
4 Attachment(s)
Re: Cannot use my second activation
UPDATE
I did a clean install of win 10 ver 1709 [fall creators] on laptop after deleting drive partitions
Installed xdp ver 12 from downloaded installer for version 12.4 from Xara.com
activated - no problems
it notified me of an update - I installed it - I got the same problem as before it updated me to ver 12.8 and declined to activate
but... after a restart and a long wait to activate... it decided it was ok... I can now use it after all
version 12 came out on 4 july 2016 - I updated shortly after - the ver 12.8 is July 24 2017
Since the move to magix my original registration date is lost in my account
the activation key having been transferred to my 'password manager' the original email was archived in a place that life is to short for to go and there has been far too much time lost this weekend already
but at least it is working - all I have to do now is, keeping my fingers crossed, deactivate it and try activating it on a restore point image that has a just a tad more already installed...
Attachment 119803
Attachment 119804
Attachment 119805
Attachment 119806
Re: Cannot use my second activation
no joy on the restored image updating to ver 12.8 it declines to activate, I shouldn't have it anyway I'm certain, the main machine has never tried to update beyond ver 12.6 - I'll stick with ver 12.4, tick the don't show again on the update dialog and leave it at that
good luck to anyone else who leaves their computer unused for a few months - we were assured that was not going to be a problem, that not making regular monthly checks back to the server would not upset anything.. but something is out of sync here surely
Re: Cannot use my second activation
I'm not being glib when I say this, Steve, but perhaps this is Nature's way of telling you that it is time to move on from this ridiculous Xara-Magix lash up. I admire the tenacity you have shown in trying to sort it out but why not step back, reinstall an earlier iteration of the software and restore sanity and order. I believe you already have Affinity Designer in your armoury and possibly Affinity Photo, too. Nothing that Xara has added over the past few releases is worth the pain of pursuing this, surely?
Bob.
Re: Cannot use my second activation
The most idiosyncratic thing about this is that older versions of Xara you install insist of updating to a version you're not entitled to for some reason... Same thing happened to me after my update service ran out.
It can't be that hard to implement a function to check if available updates are valid to the respective user and to only install those which are, can it?