Printable View
Hi,
Newbie here...
I have designed a website in Xara Premium, the site has 8 pages, however, when I publish I don't want to publish all 8 pages. Two pages will not be published now - but will be in the future.
How can I "hide" the two pages from being published?
thanks,
Kev
Kev, is the content important enough for you to not want it available until approved?Quote:
Originally Posted by alphawave
There are a number of strategies: code to jump from the page immediately to a safe page (content still published); placing a white rectangle over the content and grouping everything, not forgetting the other layers; copying the master design file and simply deleting the pages.
Obviously, you need to consider the NavBar in all this.
Acorn
Hi,
The page has content that is required - but probably not for a couple of months.
On another software i have used it was possible to "hide" the page and this would also hide the corresponding tab on the nav bar.
I guess i could delete the pages - but this would mean re-creating them and the associated content later
I just want to publish the site but not the 2 pages that i have created for later - is this not possible?
Kev
Kev, the software does not allow this. Run and keep a master design file (8 pages), copy it and delete the two pages and publish with this one (6 pages) until all 8 are required.Quote:
Originally Posted by alphawave
Remember all changes are made to the master and a new sub-copy made to publish from.
Acorn
OK sounds like a plan
Thanks
Kev
I do this on the website I maintain. In the NavBar I just don't create a link to the pages I don't want displayed. When I want to add it I just create the link.
But the page is still published so it can be found: check its ..\index_htm_files\xr_files.txt.Quote:
Originally Posted by craftech
Acorn
What you could do is put a filled rectangle over the contents of the page you don't want to reveal and group all assets on that page. When published, this page will only show a .png with a rectangle. When you're ready to make the page public, ungroup, delete the rectangle and create/activate the necessary links.
My strategy 2 in https://www.talkgraphics.com/showthr...927#post605927. It is good that someone else thinks the same way.Quote:
Originally Posted by Boy
Acorn
I must have subliminally picked up on your post. Anyway, your directions are still better because you advise to include all layers. :)
I discourage the idea of putting a white rectangle over the content, since your site can get penilized for SEO and you will start off with a red flag. I would just group all content on that page and move it to the side of your working area off screen exposure area.
behzad, it is not a white box over the content, that still publishes the content! You also have to check for Stretch objects and off-page Stickies.Quote:
Originally Posted by behzad
It is a white box grouped with all content to publish as a single white box. Again you have to be aware of what grouping does to items across multiple layers.
If you are worried about SEO ensure you include Text Inside with an H1 tag on the white box and some other text to show you care.
Moving stuff can muck up NavBars and your approach leaves nothing to see here; an SEO fail as well, probably.
The most logical thing would be to to hide the entire MouseOff layer but you still have to search down remnants.
Be sure to check the Variant page(s) too.
Acorn
Yes Acorn. Does it not when grouping text and graphics like that turns it into jpg? If so in that event SEO is not a concern I guess.
behzad, it produces a <spam> Tag.Quote:
Originally Posted by behzad
Another possible is selecting all and adding <div /> to their Placeholder bodies.
Acorn
Good conversation. This has been captured as a product improvement. Thanks.
For completeness, these are the Methods I have used for Showing and Hiding objects.
Acorn
I used MarkDown in my original web page:
👁 **Object** > Put to Back (**_Ctrl+B_**)
Basically, you are hiding things behind other things. Useful if the objects are also Soft-Grouped. Awkward if you move the top-most object and forget about the one(s) under.
CSS Reveal Effects.
Web Animation > Mouse Over > Mouse over effects.
***
👁 **Object** off the **Page** background
Visible in the design page and will not be published. Useful for notes. I suggest putting all such notes into a Notes layer and hiding that (See 👁 **Layer** below). Problems arise if using actions like Select All and accidentally grouping.
If you have Web Properties >Website > Other > Clip to Page edges: unticked then if the off-page objects are just touching the background, they are published.
***
👁 **Object** > **Page & Layer gallery** > Hide
Not visible in the Design page and will not be published.
The hardest one to justify. Better to add into a Layer that is presently hidden as unhiding a Layer is easier than unhiding scores of Objects.
***
👁 **Layer** > **Page & Layer gallery** > Hide
Not visible in the Design page and will not be published.
Useful to toggle on & off when working and off when publishing. However, if the Layer is linked from any Object, it is published and stays hidden.
***
👁 **Object** with **Placeholder** code
At simplest, add `<div id="xyz"></div>` to [Placeholder]() Body HTML (code). Object always visible but never publishes.
Always add an id. Allows for subsequent code to be added from user interaction or other events.
***
👁 **Object** with a **[Name]()** and a Style
Give the Object a special Name of `htmlclass="hide"`.
Add CSS to website or page HTML code (head):
`<style> .hide { display: none; } </style>` or
`<style> .hide { visibility: hidden; </style> }` or
`<style> .hide { z-index: -9999; </style> }`
Useful if using other CSS to reveal the Object as some stage.
Using `z-index` will put the Object behind one it is currently in front of your design; the use of **Sticky** and **Sticky at Top** can affects this approach.
***
👁 **Layer** that has an **Object** that links to the **Layer**.
This hides the Objects but the Layer always publishes whether hidden or visible. Linking object can be on the same Layer.
Useful for adding images that can be referenced elsewhere.
***
👁 **Layer** with a Bang (!) prefix to the Layer Name
Even when the Layer is hidden, it gets published and the Objects are visible.
Useful in design mode to reduce screen clutter but still get the correct site published.
***
👁 **Page** (actually 👁 all **Layers**)
Simply hide all Layers.
Prevents any of the Page content being published other than Objects on the Page and Pasteboard backgrounds. See [Xara Undocumented Features](https://helpandsupport.xara.com/xara_desktop/knowledgebase/support_questions/web-features/26-undocumented-and-advanced-web-features.html){target=_blank} > Layers
***
👁 **Page** with Meta Redirect
Add `<meta http-equiv="refresh" content="0;url=index.htm/">` to immediately go the the home page.
Use sparingly as you will forget about it being in place. Mucks up the Back button. Instead, I sometimes add a Button with label “Redirect” and a link to the Home page. In code, a Placeholder with:
`<p><a href="index.htm">Redirect</a></p>`. Both won’t hurt.
***
👁 **Page** with JavaScript Redirect
Add a [Placeholder]() or put in the Page HTML code (head):
`<script>setTimeout("window.open('index.htm', '_self')", 0); </script>`
Not particularly recommended as it is JavaScript and interferes with the loading of the page. redirect to the same page and you get stuck in a loop. Replace the 0 a any number of milliseconds to delay the jump. Mucks up the Back button.
***
👁 **Object** > Reveal Trigger
Web Animation > Reveal/Scroll > Trigger object name; with a typed-in Name that is random and is not associated with another object, the Object will never display, but is published.
Powerful as the Object can be revealed with JS/CSS and the Trigger Name could be added into the DOM…
***
Captured for the Xara team. Helpful. Thanks. :starQuote:
Originally Posted by Acorn