Hello,
I've been asked to send my designs in AI or EPS format, can I rely on xara exported files in these formats?.
Best regards
Printable View
Hello,
I've been asked to send my designs in AI or EPS format, can I rely on xara exported files in these formats?.
Best regards
Yes and no. It all depends what the designs are, what they are made of. Certain things in a XAR file can be converted to bitmap. But the files do open in AI. They (the elements of the design) will be contained in multiple masks.
I always at least clean up a design in AI before returning the art to a client. But for those effects, possibly transparent items that will become bitmaps, those will be redone or done in AI altogether.
Mike
How about PDF, Mike? PDF is one of Illustrator's native formats and Xara's support for PDF is more current than their support for .ai and .eps.
Hi Gary,
The old trick out of some software was to rename a PDF to .ai and that works. It keeps the filename and the proper "icon" for opening properly on the end system. Depending upon the contents, exporting to the highest PDF compatibility (Acrobat 8 compatibility in the case of Xara applications that support PDF) can help maintain transparency, but it depends on the object(s) and what transparency is used. The very nature of a PDF is that everything is contained in clipmasks. Xara and some other products are smart enough to remove those clipmasks where appropriate in most cases, AI is not.
If those files will not eventually be opened for editing by even an entry-level designer, often no one is the wiser. In the end, though, without AI one cannot really decide if everything made it into AI properly using the AI filter (which is really a type of EPS filter).
So yes, using a PDF the contents will survive at least in appearance and can be reviewed in at Adobe Reader before handing them off. And I would change the extension before sending it off for the reason above. Good point, Gary.
Mike
Like Mike states your design has to be simple vector. No shadows, bevels, transparency, complex fills, basically all of the RGB effects that Xara can do, possibly also include Blends as well as they come over as a group of shapes which are a pig to edit in Illy. If you design is complex I would send him a PDF as well, they're a lot easier to edit. They will still be left with a lot of clipping masks to sort out to get to your design to modify. I would say this is a good thing gives you more work cos they'll get fed up with the bother of it
Or they'll hire someone who will at least return work in proper AI format or simply uses AI.Quote:
Originally Posted by Albacore
The filter for AI format needs redone. CorelDraw has pretty good AI support in and out and is updated often enough I haven't had most issues with cross-application trading.
Here's an example of an issue even when all PDF elements are vector. Logo made in XDP X11. In the PDF, Acrobat reports a perfectly made vector PDF:
Attachment 112017
When bringing it into AI, it all looks fine:
Attachment 112019
But I need to ungroup the contents three times and release the clipmask (there are also 3 of them). Then the transparent bits look like:
Attachment 112020
However, blends do survive:
Attachment 112021
Which is why I often use blends for shadows in this type of design.
You are great !!!!!, this forum is the best thing xara has, I only need to send the artwork to e printed ,according to your explanation I think I will create a bitmap of the whole file and then a pdf from it.
They don't need to edit the design only print it, is this option right?
Best regards
Export to PDF is all you need to do. Then open the PDF in Adobe Reader or another quality PDF reader and inspect it (look at it) to make sure it is as desired. If so, send it to them.
Mike
Yes, but I should change the extension to eps or ai because they want it in that format.
According all the conversation that is what I should do, shouldn't I?.
Best regards
The only reason I know of that someone, especially a printer, wants an .ai file is to open it in Illustrator if only to print from--if not to edit it prior to printing. I would seek clarification as to whether they intend to edit or the printer just load into AI or ID to print from.
But yes, you can just change the extension.
I should clarify. For an .ai version the extension change is fine. I will try on changing an XDP pdf's extension to .eps and see how it loads into AI and get right back...
Ok, again thank you all for your kind and fast reply
OK. On my PDF shown in part above, changing the extension to .eps works the same as changing it to .ai.
It was traditional that e-print shops asked for .eps because of the way it read text and carried the font info.
Thank you very much for your help, best regards
It may be a pain, but I highly recommend physically cutting your shapes in Xara before exporting to Illustrator if you are using masks (Q shortcut) and are outlining the masking object. The reason is that for some reason, somewhere in the translation process, the outline gets lost if you have it on the object that's acting as a mask for other objects.
The alternative is to duplicate the framing object (the one masking the others) and set it behind your object (if possible) and put an extra thick outline on it that creeps out from behind your main image. I ran into this issue working with a client recently. Knowing the quirks of the export/import behavior helps with creating the image in Xara from the get-go without having to go back and tweak/edit the image in Xara after you already made it.
Also, avoid feathering. These tend to get exported as bitmaps as the old Illustrator formats that Xara exports didn't have feather capability. Instead, use simple gradients/transparencies where possible. Illustrator also doesn't support the extended gradient types in Xara either (they'll get turned into bitmaps too).
That's all I've noticed so far. It's workable as long as you have an idea of what Illustrator expects and what Xara thinks Illustrator expects when it spits out an adobe format.
hseiken,
Thank you very much for your explanation.
Best regards.